Question 1 to 5 have to be answered on the basis of the information given below:
Section 1
On Sunday, December 23, four ships were berthed at the Port.
Ship W left at 4 PM on Sunday, December 23, for a series of 8-day cruises to Bermuda and Nassau. Ship X left at 4:30 PM on Sunday, December 23, for a series of alternating11-day and 13-day cruises. Ship Y sailed at 5 PM on Sunday, December 23, for a series of 5-day cruises to Bermuda. Ship Z sailed on Monday, December 24, for a series of 7-day cruises to Nassau. Each cruise begins on the day after departure. Each ship is scheduled to return to the Port early in the morning after the last day of the cruise and leave again in the afternoon of the same day.
1. On December 31, which ships will be sailing from the Port on a New Year's Eve.
(a) W and X
(b) X and Y
(c) W and Z
(d) X and Z
(e) X, Y and Z
Ans: (c)
2. On how many sailing dates between December 24 and February 28 will ship W be moored alongside another ship
(a) 0
(b) 2
(c) 4
(d) 5
(e) 6
Ans: (d)
3. On how many occasions between December 24 and February 28 will three ships be moored at the Port.
(a) 0
(b) 1
(c) 2
(d) 3
(e) 4
Ans: (a)
4. On which day of the week will these four ships make most of their departures?
(a) Sunday
(b) Monday
(c) Tuesday
(d) Thursday
(e) Saturday
Ans: (b)
5. On which days of the week in the period between December 24 and February 28 will the pier be least crowded?
(a) Tuesday and Friday
(b) Tuesday and Thursday
(c) Friday and Saturday
(d) Wednesday and Thursday
(e) Thursday and Saturday
Ans: (a)
Question 6 to 9 have to be answered on the basis of the information given below:
The workweek in a small business is a five-day workweek running from Monday through Friday. In each workweek, activities L,M,N,O and P must all be done. The work is subject to the following restrictions:
L must be done earlier in the week than O and earlier than P. M must be done earlier in the week than N and earlier than O. No more than one of the activities can ever be done on any one day
6.Which of the following is an acceptable schedule starting from Monday to Friday
a) L, M, N, O, P
b) M, N, O, N, M
c) O, N, L, P, M
d) P, O, L, M, L
e) P, O, L, M, N
Ans. (a)
7. Which of the following pair of activities could be done on Monday and Tuesday
a) L and O
b) M and L
c) M and P
d) N and O
e) O and M
Ans. (b)
8.If P and N are done on Thursday and Friday, then which of the following is true
a) L is done on Tuesday
b) L is done on Wednesday
c) M is done on Monday
d) O is done on Tuesday
e) O is done on Wednesday
Ans. (e)
9. Which of the following could be true
a) L on Friday
b) M on Thursday
c) N on Monday
d) O on Monday
e) P on Tuesday
Ans. (e)
Section 2
1. Encryption and decryption is done in the following layer.
a) DLL
b) Network layer
c) Transport
d) Presentation
Ans: (d)
2. Floating point has different formats on two different machines. This modifications are taken care by which layer?
a) DLL
b) Network layer
c) Transport layer
d) Presentation
Ans: (d)
3. Time complexity of quick sort algorithm is
a) N*N
b) log(N)
c) N*log(N)
d) N
Ans: (c)
4. Time complexity of AVL tree is .
a) N*N
b) log(N)
c) N*log(N)
d) N
Ans: (b)
5. Cycle stealing is used in which concept?
a) Programmed I/O
b) DMA
c) Interrupts
Ans: (b)
6. How many octets are there in an IP address
a) 6
b) 8
c)10
d)12
7.What are the maximum number of hosts that can be served by an IP
a) 254
b) 256
c) 2**24(2 to the power 24)
8. Which of the following is model representation of life cycle software
a) Water fall model
b) Spiral
9. The purpose of reviewing code is
a) To find syntax error
b) Tocheck for the proper design
10. Semaphores are used for the resolution of
a) Contention
b) Accessing of same resources by more than one
11.In threading of processes when the race condition will happen
a) Low priority process
b) Higher priority process
(See O.S.Concepts by Silberschatz)
12.Which of the following function is not performed by O.S.
a) CPU scheduling
b) Memory management
c) Transaction
Ans: (c)
13. If two application programmes uses same libraries which of following are shared
a) Lib code
b) Code and stack
c) Data
d) Data, code and stack
14. Which is the maximum 16 bit signed integer.
a) 66337
b) 66338
c) 257
d) 258
15.When will interrupt occurs?
a) Divide by zero
b) DMA completed
c) Insufficient memory
16. Which of the following has low power cosumption
a) EIL
b)CMOS
c) Totempole Arrangement
17. Which of the following is the wrong statement
a) Cominational circuits has memory
b) Sequential circuits has memory
c) Sequential circuits is a function of time
Ans: (a)
18.Virtual address is
a) More than physical address
b) Lesstthan physical memory
c) Equal to physical memory
d) None
Ans : (a)
19. Which of the following reduces CPU burden
Ans : DMA
20. Malloc function allocates memory at
a) compilation time
b)link
c)load
d)running
Ans: d
Section 3
1.Max value of SIGNED int
2. A long C program is given -- try to be familiar with few of the concepts listed below
int *num={10,1,5,22,90};
main()
{
int *p,*q;
int i;
p=num;
q=num+2;
i=*p++;
print the value of i, and q-p, and some other operations are there.
}
how the values will change?
3. One pointer diff is given like this:
int *(*p[10])(char *, char*)
Explain the variable assignment
4. char *a[4]={"jaya","mahe","chandra","buchi"};
What is the value of sizeof(a) /sizeof(char *)
5. For the following C program
void fn(int *a, int *b)
{int *t;
t=a;
a=b;
b=t;
}
main()
{int a=2;
int b=3;
fn(&a,&b);
printf("%d,%d", a,b);
}
What is the output?
a) Error at runtime
b) Compilation error
c) 2 3
d) 3 2
6. For the following C program
#define scanf "%s is a string"
main()
{printf(scanf,scanf);
}
What is the output.
Ans. %s is string is string
7. For the following C program
{char *p="abc";
char *q="abc123";
while(*p=*q)
print("%c %c",*p,*q);
}
a) aabbcc
b) aabbcc123
c) abcabc123
d) infinate loop
8. What is the value of the following:
printf("%u",-1)
a) -1
b) 1
c) 65336
9. For the following C program
#define void int
int i=300;
void main(void)
{int i=200;
{int i=100;
print the value of i;}
print the value of i;}
What is the output?
10. For the following C program
int x=2;
x=x<<2;
printf("%d ",x);
Ans. 8
11. For the following C program
int a[]={0,0X4,4,9}; /*some values are given*/
int i=2;
printf("%d %d",a[i],i[a]);
What is the value?